Want a price for your place? Text us what you need and your suburb, and our automated quote assistant replies straight away at any hour. To talk to a person, call the office Monday to Friday, 7am to 3:30pm.
Getting a TV on the wall looks sleek, saves floor space and can boost your home’s feel. The price you pay, however, can vary a lot. Below is a clear breakdown of what you’ll actually spend and why.
What Does TV Wall Mount Installation Cost Usually Include?
A typical Australian job covers three things: the bracket itself, the labour to fit it, and any cable‑management work. Fixed brackets sit flat against the wall and are the cheapest option, while full‑motion arms that swing and tilt cost more because they need stronger fixings and more careful alignment.
Faze Electrical provides a full‑service package that bundles the mount, the installation labour and basic cable concealment into one upfront price. Homeowners can expect a total bill between AUD 250 and AUD 500, depending on the mount type and wall material. TV Wall Mount Installation: Step‑by‑Step Guide
| Component | Typical Cost Range (AUD) | What’s Included |
|---|---|---|
| Fixed mount | 200 to 300 | Bracket, studs‑locating, basic cable cover |
| Tilting mount | 220 to 350 | Bracket, angle adjustment, cable routing |
| Full‑motion mount | 200 to 500 | Articulating arm, heavier fixings, extended concealment |
| Labour (per hour) | 250 to 400 | Site visit, mounting, testing, clean‑up |
Professional installers also check that the wall can bear the TV’s weight. If the wall is drywall, a stud‑finder helps locate solid points. Brick or concrete walls need masonry drills and specialised anchors, which add material costs. Wikipedia explains how wall‑mount hardware distributes load
The Main Factors That Change the Installation Price
Screen size is the first driver. A 55‑inch set typically needs one installer, but an 85‑inch panel can weigh over 70 kg and often requires two people to lift and align it safely.
Mount type matters too. A fixed bracket holds the TV in one position, while a tilt or full‑motion arm adds moving parts, which means extra labour and stronger fixings.
Wall construction creates the biggest price swings. Plasterboard is quick to work with; brick, concrete or tiled walls need drilling with a hammer‑drill, special anchors and dust control measures. Each of these steps adds both time and material costs.
Cable concealment is another cost centre. Running HDMI and power cables inside the wall yields a clean look but requires cutting into the cavity, complying with AS/NZS 3000 wiring rules and possibly installing conduit. Surface trunking is faster and cheaper, but the cables remain visible.
Finally, any required reinforcement, such as adding a plywood backer behind a drywall surface, can tack on another $50‑$200. This is common for large, heavy TVs that exceed the standard stud capacity.
Wall Type, Cable Concealment and Power Requirements
Australian wiring rules (AS/NZS 3000) require any new power outlet or in‑wall cable run to be inspected for safety. A licensed electrician will verify that the circuit can handle the TV’s draw, usually under 10 A, and that the earth connection is solid.
When the TV is mounted on plasterboard, the installer can use toggle bolts that spread the load across a larger area. For masonry, they switch to expansion anchors that grip the brick or concrete. The choice of anchor directly affects the labour time.
Cable routing options include:
- Surface trunking, cheap, quick, visible.
- In‑wall conduit, hidden, requires wall cuts, higher cost.
- One‑Connect style routing (for Samsung Frame), specialised cable that runs to a separate box, often hidden in a cabinet.
Each method adds a different amount of time. Surface work can be done in under an hour; in‑wall runs may take two to three hours, especially on solid brick.
Power placement also matters. If a conveniently located outlet is missing, the electrician will install a new GPO, run conduit and ensure the new point meets the Australian Standard for spacing and height.
When a Licensed Electrician Is the Right Choice
Not every job can be safely DIY‑ed. Large screens, heavy mounts or complex cable runs all raise the risk of injury or damage if done incorrectly. A licensed electrician brings the right tools, insurance and knowledge of local building codes.
Faze Electrical’s team carries full insurance and follows the AS/NZS 3000 standard on every job. Their electricians also provide a written warranty for both the mount and any electrical work performed. Power Point Installation Cost Australia 2026, Faze Electrical
When you live in a strata‑managed apartment, you may need approval to drill into the common wall. A professional will handle the paperwork and ensure the work does not affect neighbouring units.
Special cases include:
- Mounting on timber VJ walls, requires careful screw placement to avoid splitting.
- Installing near a fireplace, heat clearance must be checked to avoid overheating the TV.
- Outdoor or semi‑outdoor mounts, need weather‑proof brackets and IP‑rated cabling.
If any of these conditions apply, hiring a licensed electrician is the safest route.
How to Get an Accurate TV Wall Mount Installation Quote
The first step is to gather the basics: TV size, weight, wall type and your preferred mount style. Write these details down before you call for a quote.
Next, request a fixed‑price quote rather than an hourly estimate. Fixed quotes reduce surprise costs and let you compare offers side by side.
Ask the installer whether the quote includes:
- Mount bracket and any required hardware.
- Labour for fixing the bracket and testing the TV.
- Cable concealment (in‑wall or surface).
- Any additional electrical work, such as a new power point.
Faze Electrical offers a free on‑site assessment. During the visit they will verify stud locations, measure the mounting height and confirm any extra work needed. The assessment result is a single price that covers everything. Electrician Prices Brisbane 2026 | Upfront Rates, Faze Electrical
Finally, check that the installer holds a valid electrical licence and carries public liability insurance. This protects you if something goes wrong during the job.
FAQ
What is the average tv wall mount installation cost in Australia?
The average cost falls between AUD 250 and AUD 500, covering the bracket, labour and basic cable management. Prices rise for larger screens, full‑motion arms or in‑wall cable runs.
Do I need an electrician to mount a TV?
You need a licensed electrician when the job involves new power points, in‑wall cable routing or mounting on masonry walls, because the work must meet AS/NZS 3000 standards.
Can I hide the cables completely?
Yes, by routing HDMI and power cables inside the wall. This method adds extra labour and may require a conduit, but it gives a clean, gallery‑like finish.
How long does a typical installation take?
A straightforward plasterboard install with surface trunking usually finishes in 60‑90 minutes. In‑wall concealment on brick or concrete can take 2‑3 hours.
Is there a warranty on the work?
Faze Electrical provides a workmanship warranty on both the mount and any electrical work performed, giving you peace of mind after the job.
Will my TV’s warranty be affected by a professional install?
Professional installation does not void the TV manufacturer’s warranty.
Conclusion
For most Australian homes, the safest and most reliable route is to hire a licensed electrician like Faze Electrical. Request a fixed‑price quote, confirm what’s included and schedule the install. A single call to Faze Electrical will get you a clear, compliant solution.
Need this done in Logan or Brisbane?
Text us what you need and your suburb. Our automated quote assistant replies straight away, at any hour.
Text for a quote Call 07 4428 2766
Calls are answered Monday to Friday, 7am to 3:30pm.
Related guides
Best Home Automation Systems for Australian Homes 2026
Best Smart Home Devices: An Australian Guide
Best Security Camera Installation Cost Brisbane – Top 10All guides: electrical and air conditioning guides.
Licensed electricians and ARCtick refrigeration technicians, Queensland Electrical Contractor Licence 90552 and ARCtick L181564. We install and service split systems and do the electrical across Logan, Brisbane southside, Ipswich and the northern Gold Coast.
About Faze | Call 07 4428 2766 | Text 0489 275 747